Synology NAS Ransomware Attacks: Update DSM and Back Up Your Data

Synology confirmed on October 29, 2026 that attackers are encrypting data on outdated NAS devices for ransom. Here is how to check your DSM version, turn on auto-updates and back up with the 3-2-1 rule.
Key Takeaways
- Synology said on October 29, 2026 that attackers are targeting NAS devices still running outdated DSM versions, encrypting data and demanding ransom.
- According to Synology, the vulnerability used in these attacks was patched in December 2024, so devices that have not been updated are the ones at risk.
- Synology urges users on vulnerable versions to update DSM immediately and turn on automatic updates so the system always stays current.
- In advisory Synology-SA-24:20, which the press release cites, the most severe flaw, CVE-2024-10441, has a CVSS 3.1 score of 9.8.
- Synology's Knowledge Center recommends following the 3-2-1 backup rule and not exposing DSM directly to the internet.
News of Synology NAS ransomware attacks spread in late October. Taiwan-based Synology issued a press release on October 29 saying attackers are targeting NAS devices that have not been updated, encrypting the data and demanding ransom. Families and small businesses often keep photos and work files on a NAS, and once those files are encrypted they are hard to get back. This guide sums up Synology's official notice and explains how to check your version, update and back up.
What Did Synology Announce?
Synology said attackers are exploiting a vulnerability patched in December 2024 to target devices on outdated DSM versions, encrypting data for ransom. It urged users to update immediately and turn on automatic updates.
A NAS (network-attached storage) is a storage device connected to a home or office network, used to keep files, photos and backups in one place. DSM (DiskStation Manager) is the operating system on Synology NAS devices. Ransomware is malware that encrypts your files and demands payment before it will unlock them.
The reference attached to the press release is security advisory Synology-SA-24:20. First published on November 5, 2024, it lists three vulnerabilities. The most serious, CVE-2024-10441, is in the system plugin daemon and could let a remote attacker run arbitrary code. It has a CVSS 3.1 score of 9.8 and is rated critical. CVSS is the standard international scale for rating vulnerability severity, with a maximum of 10.
Synology's press release did not say how many devices were affected and did not name the attackers or the ransomware. Names and figures circulating online have not been confirmed by Synology, so this article does not repeat them.
| DSM version | Fixed version (or later) | Advisory severity |
|---|---|---|
| DSM 7.2.2 | 7.2.2-72806-1 | Critical |
| DSM 7.2.1 | 7.2.1-69057-6 | Critical |
| DSM 7.2 | 7.2-64570-4 | Critical |
| DSM 7.1 | 7.1.1-42962-7 | Critical |
| DSM 6.2 | 6.2.4-25556-8 | Moderate |
These are the minimum versions that fix this advisory. Synology has since published other advisories that require even newer versions, so it is best to update straight to the latest version available.
How Do You Check Your DSM Version and Update?
Sign in to DSM, go to Control Panel → Info Center → General to see your version, then go to Control Panel → Update & Restore → DSM Update to install the latest version.
- Sign in to DSM with an administrator account in a web browser on your computer.
- Go to Control Panel → Info Center → General, check your current DSM version and compare it with the table above.
- Go to Control Panel → Update & Restore → DSM Update. If a major update is available, click Download and then Update Now; minor updates show a message next to Status.
- Back up first. Synology says updating does not affect the data on your NAS, but it strongly recommends creating a backup beforehand. Updates only go forward and cannot be rolled back.
- Update at a time when nobody needs the files, then sign in again and confirm the version has changed.
Note that older models can only be upgraded so far. Synology announced that DSM 6.2 reached the end of its Extended Life Phase on October 1, 2024, after which it no longer receives functionality, security or package updates. For models that can be upgraded, Synology recommends moving to DSM 7 as soon as possible.

How Do You Set Up Automatic Updates?
On the DSM Update page, click Update Settings. Synology recommends at least choosing to automatically install important updates, so updates with critical security fixes are installed without you having to remember.
| Option | What gets installed automatically |
|---|---|
| Automatically install important updates | Updates that fix security vulnerabilities and other issues |
| Automatically install the latest updates | Important updates plus new-feature updates, but never an automatic move to a new major version |
| Notify me and let me decide | Sends a notification without installing; only on models released in 2024 or earlier |
On models released in 2024 or earlier, you can choose which days and times to check for updates. Models released from 2025 check daily and install at a scheduled time; desktop notifications for important updates let you postpone installation by up to 28 days.
Is It Safe to Open the NAS Management Interface to the Internet?
Synology advises against it. Its Knowledge Center says not to expose DSM directly to the internet unless necessary. If you need remote access, use a VPN and open only the router ports that are strictly needed.
A VPN (virtual private network) creates an encrypted tunnel back to your home or office network before you reach the NAS, so the management page never sits on the open internet. Synology's Knowledge Center also recommends these settings:
- Deactivate the default admin account, after confirming that another administrator account can sign in normally.
- Turn on multi-factor authentication; in DSM 7, go to Options → Personal → Security → 2-Factor Authentication. To see how it works, read What is 2FA.
- Enable Auto Block under Control Panel → Security → Protection to block IP addresses after repeated failed sign-ins.
- Enable the firewall and allow access only from trusted IP addresses, subnets or regions.
- Scan your settings with the built-in Security Advisor. Synology does not recommend installing third-party packages, and any you have installed should be kept on the latest patches.

What Is the 3-2-1 Backup Rule?
The 3-2-1 rule, which Synology recommends, means keeping three copies of your data on two different types of storage, with at least one copy offsite, so another copy survives if the NAS fails.
Synology warns that keeping copies only on the same NAS can still lead to data loss if the RAID fails or drives break. RAID combines several drives and is commonly used so that data survives a single drive failure, but it cannot stop files from being encrypted. Synology's ransomware guidance also recommends keeping an offline, encrypted backup and regularly checking that it can actually be restored.
Synology NAS devices include several backup tools. Hyper Backup can back up to an external drive, another NAS or the cloud. Snapshot Replication takes regular snapshots, and on supported models it can lock snapshots so they cannot be deleted for a set period. USB Copy starts a backup automatically when you plug in an external drive. For example, a small studio could treat the NAS as the first copy, run a weekly Hyper Backup to an external drive that is then unplugged and stored as the second, and send a third copy to the cloud or a NAS in another location as the offsite backup.

If Your NAS Files Are Encrypted, Do These 3 Things First
The ransomware response checklist in Synology's Knowledge Center lists three key steps after an attack:
- Work out which devices are affected and immediately isolate infected devices from the local network, for example by unplugging the network cable.
- If you cannot disconnect a device, you can shut it down to stop the spread, but files and evidence held in memory will be lost.
- Restore your data from backups or snapshots.
Afterwards, you can generate system logs from DSM's Support Center and send them to Synology's technical support team, along with when you noticed the problem and the ransom note. You can also ask law enforcement whether a decryption method is available.
A Separate Notice: Update PHP Packages on Your NAS Too
Unrelated to these ransomware attacks, Synology published advisory Synology-SA-26:14 on October 22 about the PHP2Shell vulnerabilities. The affected packages are the PHP 7.3 to 8.4 packages on DSM, plus Synology Calendar and Mail Station. If you have them installed, update them in Package Center to the fixed versions listed in the advisory; PHP 7.3 has reached end of life and will not be fixed. Synology says the PHP built into DSM itself has no external attack surface and the risk of exploitation is very low. For background, see What is PHP2Shell.
AI is also speeding up how quickly vulnerabilities are found; for one recent example, see What is Gemini 4 Carbon. The incident is still under investigation, so rely on Synology's official notices for affected versions and remedies.
Frequently Asked Questions
My NAS is not open to the internet. Do I still need to update?
Yes. Synology urges everyone running a vulnerable version to update DSM immediately and turn on automatic updates. Keeping the NAS off the internet lowers the chance of attack, but it does not replace updating.
Will updating DSM delete the data on my NAS?
Synology says updating the system does not affect the data on the NAS, but it still strongly recommends a backup first. Updates also only move forward, so you cannot roll back to the old version afterwards.
What about older models that can no longer be upgraded?
DSM 6.2 reached the end of its Extended Life Phase on October 1, 2024 and no longer gets security updates. Models that can be upgraded should move to DSM 7; for those that cannot, it is even more important not to expose the management interface to the internet.
If I have RAID, do I still need a separate backup?
Yes. Synology warns that keeping copies only on the same NAS can still lead to data loss if the RAID fails or drives break, so you should also back up to an external device, another NAS or the cloud.
Sources: Synology press release urging DSM updates (2026), Synology security advisory Synology-SA-24:20 (2024), Synology Knowledge Center: How can I prevent ransomware attacks on my Synology device?, Synology security advisory Synology-SA-26:14 PHP2Shell (2026)